1. Home
  2. Services and Areas
  3. FPV Venue Tour

Production · FPV venue tour

FPV Drone Venue and Facility Tour

Indoor FPV drone filming makes it possible to present a business in one unbroken shot that goes in through the door and travels around inside. The viewer moves along with the camera from the entrance of a restaurant to its terrace, from the bar of a beach club to its jetty, or from the raw materials intake of a factory to the dispatch area. At Kavron Media we film one-take FPV tours for hotels; we apply the same technique to restaurants, seafront businesses, sports and leisure facilities and production plants in Manavgat, Side, Alanya, Belek and Antalya. This page describes the process for venues other than hotels.

What does a one-take tour tell the viewer?

In a conventional promotional video the footage is cut and joined: one shot of the dining room, the next of the terrace, then the kitchen. The viewer cannot tell how these areas connect to one another or how big the venue really is. In a one-take tour the camera never stops and there are no cuts; the viewer builds the floor plan of the venue in their mind without being asked to.

This continuity also gives a sense of honesty. There is no corner to hide in the edit; wherever the camera passes is what you see. For businesses that are confident in their venue, this is a strong message. We describe the technique itself and how it differs from a standard drone on our FPV drone filming page, and its application specifically to hotels on our FPV drone hotel tour page.

FPV tours in restaurants and cafés

In a restaurant the route usually starts from the street or the car park, goes in through the door, passes the welcome point, travels around the dining room and ends at the venue's strongest spot: the terrace with a view, the tables by the river or the open kitchen. Small scenes along the way, such as a waiter carrying plates, the bartender preparing a drink or the chef working at the counter, bring the tour to life.

We do not film a restaurant tour during service, with real guests at the tables. The people seated at the tables have been invited for the shoot and briefed. On a route where hot plates and drinks are being carried, the timing is settled in rehearsal; the flight is planned so that the paths of the drone and the serving staff do not cross.

FPV tours in beach clubs and seafront businesses

Seafront businesses are among the most suitable venues for FPV, because the indoor and outdoor areas open onto each other. The route starts at the entrance, passes in front of the bar, glides between the sunloungers, travels along the jetty and rises over the sea to show the business together with the shoreline. The long sandy beaches on the Side, Sorgun and Kızılağaç stretch provide a strong backdrop for this final shot.

Timing is decisive in these shoots. Early in the morning the light is soft, the area is empty and the sunloungers are in neat rows; close to sunset the atmosphere is warmer. For the section over the sea we keep an eye on the wind. For flights in the open, the flight status of the area and the need for permission are checked before the shoot; we do not fly over people on the beach.

FPV tours in sports, leisure and service facilities

  • Gyms: a journey from the entrance to the weights area, the studios and the pool; it shows the equipment and how spacious the place is.
  • Water parks and leisure areas: shots that pass around the slides and over the pools, filmed while the area is closed to use.
  • Spas and wellness centres: a calm flow between the reception, the relaxation area, the hammam and the pool.
  • Event and wedding venues: the full setup shown in one take, from the entrance to the stage.
  • Shops and showrooms: a tour that enters through the shop window and travels around the product groups.
  • Schools, training centres and offices: a journey that shows the classrooms, the shared areas and the working environment.

Factory and production plant tours

In a production plant, a one-take tour tells the story of the process itself: where the raw material comes in, which machines it passes through, where it is checked, how it is packed and dispatched. It is one of the clearest ways of showing a customer, a dealer or an export buyer the layout and scale of the plant.

Safety conditions in a factory are stricter than in venue shoots. We carry out the recce together with the occupational safety officer; moving machine parts, crane and forklift routes, dust, steam and hot surfaces are kept away from the route. Because metal structures and large machines can weaken the control and video signal, the signal is tested along the route beforehand. Processes and screens that need to be kept confidential are left off the route, and employees who will appear on camera are informed in advance.

Route design and rehearsal

  1. We walk around the venue together; the areas that must be seen and those that must not be seen are marked.
  2. The start and end points are chosen; the tour should end not at the weakest spot but on the strongest image.
  3. Doors, curtains, narrow passages and hanging objects are checked one by one; where necessary they are temporarily secured or removed.
  4. The lights along the route are switched on, the screens are turned on, and the tables and products are arranged.
  5. Where the people who will appear on camera are to stand, and what they are to do, is decided.
  6. The route is rehearsed several times, first slowly and then at its real speed.
  7. The filming flights are made; every take is watched together on screen and the best one is chosen.

Sound design, colour and delivery

The sound of a tour video is created not during filming but afterwards. Every area the camera passes through is given the sound of that area: conversation and the clink of glasses in the restaurant, waves on the seafront, weights and music in the gym, the rhythm of the machines in the factory. The music sits on top of these sounds. In colour grading the difference in light between indoors and outdoors is balanced and the true tones of the venue are preserved.

Delivery includes the landscape main tour, short excerpts for social media and, if wanted, an annotated version with the names of the areas on screen. On-screen text or voice-over in a foreign language can be added to factory tours. The tour video can be used on the homepage of the website, on the map profile, in sales presentations and on trade fair screens.

What affects the quote

We do not publish prices; we prepare a quote once we have seen the venue. The quote is determined by the length and difficulty of the route, the number of indoor and outdoor sections, the time needed for rehearsal, the people who will appear in the scene, safety preparation in factories, sound design and extras such as on-screen text or voice-over.

Booking the tour video for the same day as a photography or short video shoot means the venue is prepared once, and it is the most efficient solution. If a refurbishment or a change of layout is planned at your venue in the near future, we recommend leaving the shoot until afterwards; in a one-take video it is not possible to change one section later.

From our real projects

The videos below are published on our YouTube channel. Click to watch.

See all our work

Frequently asked questions

Can indoor FPV drone filming be done in small venues too?

It can, but in very small venues consisting of a single area the tour turns out short and loses impact. An FPV tour gives the best result in venues with several areas that connect to one another. On the recce we tell you plainly whether or not your venue suits this technique.

Does the business have to close during the shoot?

Closing completely is not usually necessary, but the areas along the route do need to be closed to guests for the duration of the shoot. So we prefer the hours before opening or a time slot when the business is quiet.

Will the drone damage the furnishings in the venue?

Indoors we use small, light craft with their propellers inside a protective frame, and the route is settled in rehearsal. Even so, delicate objects such as chandeliers, hanging decorations and glassware are identified on the recce; the route is drawn away from them or the objects are temporarily removed.

Do you have FPV tours we can watch as examples?

The sample videos on this page are one-take FPV tours we have filmed for hotels, and they give an idea of the technique. The route logic is the same for your restaurant, seafront business or facility; we design the route specific to your venue together on the recce visit.

Can filming take place in our factory while production is running?

It can, and it is often what is wanted, because a line that is running tells more than one that is standing still. For this a joint plan is prepared with your occupational safety officer, risky zones are taken off the route, and the employees along the route are told the time of the flight.

How should I choose between an FPV tour and an ordinary venue promotional video?

If you want to show the flow and size of the venue, an FPV tour is more suitable; if you want to present the food, the details, the people and the service in depth, an edited venue video is. Many businesses use the two together: the tour catches the eye, the edited video informs.

Let's talk about your project.

Tell us briefly what you have in mind and we will come back with a plan that fits.